Kit contains:
- 1 x Cartridge Wax Heater WX1-C
- 2 x Azulene Soft Wax Cartridge 3.38 oz 100g
- 1 x Epilating Strips 100pcs

Wax Heater:
Technical specifications:
Voltage : 110V
Frequency : 50Hz/60Hz
Power : 40W
Volume : 1pcs*100G
Max Temperature :100 oC
Nonadjustable temerature
Shell material : ABS
Inner material : Aluminum
I.S.9.5*5*20 CM
O.S. 31*26*47 CM

Fits standard cartridges with the following measurements:
Height: 13.5 cm / 5.31 inch
Length: 5.5 cm /2.16 inch
Width: 2.25 cm / 0.88 inch Warranty 1 year


Wax Necessities WX-C1 Wax Cartridge Heater.
Ideal for use with all Wax Necessities soft wax cartridges,the WX-1C heater offers a simple and reliable service. Onthe exterior the heater is molded in a highly resistant APSthermoplastic plastic resin. and aluminium is used for thequality inner construction.
To prolong the life and efficiency of the warmer, it isrecommended a Wax Necessities soft wax cartridge alwaysbe inserted into the heating chamber. Never pour waxdirectly into the heating well.
To maintain optimum condition of the heater, clean regularly.Use Wax Necessities Citrus Cleaner for heavy wax residues.Do not use Citrus Cleaner directly on the `Wax Necessities`LOGO printed on the heater.
Your warmer has been tested before leaving the factory and is guaranteed against all manufacturing defects, under normal use, for 12 months from date of purchase. If the heater will fail to operate due to defect in material or workmanship, we will repair or replace it with date proof of purchase. Guarantee does not apply to damaged lids or heater resulting from misuse or accident.


INSTRUCTIONS FOR USE
Remove the heater lid andplace the wax cartridgedirectly into the heatingchamber(We recommend WaxNecessities cartridges).
Plug in the appliance. Redlight indicates power is on.
The indicator light willremain illuminated duringoperation time.Please allow 10-30 min,depending of the ambienttemperature until the waxis ready to use.
To ensure the wax hasreached a suitable tem-perature and to avoid loss of working time, it isrecommended to plug in theheater approximately onehalf hour before servicesbegin.
Unplug and cover unitloosely with lid when not inuse.
Caution: Locking lid tightlymay cause lid to break. If lidadheres to melting pot,pre-heat the warmer prior tolid removal to prevent lidfrom cracking.
Recommended Wax Necessities cartridges.
A WARNING
HEATER AND WAX ARE GETTING HOT.ALWAYS TEST WAX ON A SMALL AREAOF SKIN PRIOR TO APPLICATION.

Ideal for all Wax Necessities Cartridges3.4 oz

IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using the heater!
When using electrical appliances, basic safety precautionsshould be followed

WARNING
To reduce risk ofburns or Injury:
Always test wax on small area ofthe skin before application.
Do not touch the metallic surfac-es of the warmer. Unit is hotwhen in use.
Use only on a flat, solid, surface.
Do not plug-in unit where powercord can be tripped on or wherecord hangs over edge of workingtable and can be pulled off.
Do not leave unit on unattended.
If wax begins to smoke, unplugunit immediately and havechecked by electrician.
AlIow unit to cool before,cleaning or storing.
Do not leave children unattendedaround working heater. Use unitonly for the intended use asdescribed in this booklet.
For best results, also refer toWax Necessities waxing instructions onthe product package.

DANGER
To reduce risk of electrocution: (which can result in Injuries 8. death)
Unplug the heater immediatelyafter use.
Do not use in bathrooms or onwet floors and surfaces.
lf unit falls into water, unplugimmediately.Do NOT reach Into water.
Never operate heater if it has adamaged power cord or plug. ifit is not working properly. or hasbeen dropped or damaged.
DO not connect more than 3heaters on an extension cord.

For professional use only!

Azulene Soft Wax Cartridge:
-Use with strips
-With antiseptic chamomile extract
-Dark color well visible on the skin
-Ideal for thin, light hair
-Transparent

Transparent wax. Contains wild chamomile extract, characterized by antiseptic properties.
Due to its dark color this wax is well visible on the skin. Created for removal of thin, light hair, characterized by great adhesion, applied in thin layer and effectively remove hairs.
Temeperature: max 39 degrees C (102.2 degrees F)
Use with strips.

IMPORTANT NOTE: Professional Use Only! Please read carefully all the instructions on the product label before use.
SKU007033

Data sheet

Color
Blue
Application area
Intimate
Skin type
All Skin Types

in the same category

16 other products in the same category: