-Digital temperature control with memory
-Dual digital temperature display (F/C)
-Exclusive Waxness W-CUBE design
-Detachable inner aluminum wax pot
-1 Year warranty

The Single Wax Heater is suitable for all types of hair removal, therapeutic waxes, and paraffin. It melts all types of depilatory waxes: canned, beads, and in block form. Its internal heating element is built to last. With 4-1/8``diameter, 2-1/4`` deep interior heating chamber is designed to support most wax containers, such as 14 to 16-ounce size and other cans of the same diameter. The warmer includes 1 removable metal wax pot liner for use with loose wax, direct pouring, and easy cleaning. It measures 4`` in diameter and 2-5/8`` deep, will hold up to 16 fluid ounces of wax. The temperature can be adjusted from 40 to up to 80 degrees C (104 to 175 F) for a quick and even wax meltdown. The thermostat control is digital with memory. Digital display with dual-standard (F/C). RoHS certified.
Dimensions: units measure 6' X 6' diameter, 5.5' tall. Power: 100W
Includes:- wax heating machine (wax not included)
- one removable wax pot liner
- USA standard grounded power-cord (120 volts)
- Instructions/owner`s manual.



Power: 100W

Includes:
- wax heating machine (wax not included)
- one removable wax pot liner
- USA standard grounded power-cord (120 volts)
-Holds 16 Oz wax- instructions/owner`s manual.

-Specially formulated for sensitive tattooed skin.
-Hypoallergenic, no rosin.
-Creamy, Extra delicate for the skin but tough on hair
-Ultra-low temperature.
-Inspired by explorers' travels in the Caribbean Islands, delicately scented with exclusive fine perfumery grade Vetiver & Rum scent.
-Made in Italy

Waxness Barbero Tattoo is a low temperature, hypoallergenic, creamy wax specially formulated to protect sensitive tattooed skin. It is recommended for all sensitive skin as it is unlikely to cause any allergic reaction and has a very low grip on the skin. Barbero Tattoo will remove most hairs on the first try, minimizing skin stress.

Directions:
Melt wax over low heat. Temperature: max 42 degrees C (107.6 degrees F).
Test for correct temperature. WARNING: Hot wax may cause skin burns.
Ensure skin is clean. Prep skin with powder or antiseptic lotion if necessary.
The wax will be ready to remove once it is no longer sticky to the touch.
Flick the lower part of the strip, keeping the skin taut. Pull the wax strip off briskly, against the growth of the hair, close and parallel to the skin.
Apply an astringent product followed by a soothing oil or lotion when treatment is completed.

Warnings: Please read the instructions on the package in full before proceeding with the treatment. Failure to follow instructions and warnings may result in severe skin irritation and other injuries.

Ingredients: Hydrogenated Polycyclopentadiene, Ethylene/VA Copolymer, Paraffin, Cera Microcristallina (Microcrystalline Wax), Mica, CI 77891 (Titanium Dioxide), Parfum, CI 77491 (Iron Oxide), Linalool.


Body Wax Spatulas:
Smooth, medical-grade applicators for body waxing
Material: Wood
Size: 6 inch X 3/4 inch

Protections collars: green, yellow, and red
-Fits most brands 14 Ounces tins
-Colorful design matching the color of beads you use
-The design minimizes the wax spots therefore one collar can be used several days
-Size -Inner circle 3 3/4"
-External circle 6 1/8"

 H-Specially formulated for tattooed sensitive skin, to be used with Waxness Sensitive Skin Waxing System -Protects sensitive skin during waxing -Removes wax residues after waxing -For use with rosin free / synthetic based hard wax A gentle natural oil, based on natural ingredients with a high concentration of Olive Oil. When used before waxing, the oil penetrates the skin while leaving it smooth and not greasy, ready for a comfortable waxing. Protects the skin during waxing by lowering the adherence on the skin but, due to its special formulation allow the wax to create a strong grip on the hair. Removes the wax residues and moisturizes the skin leaving it smooth when used after waxing. Waxness Sensitive Skin Waxing System using Pre-Post Oil For this procedure, use only synthetic resin wax such as Italian Velvet, Russian Pearl, Charcoal, Tattoo, Royal Crystal, Bikini Lotus etc. Do not use this procedure with natural resin wax as this type of resin will not perform well with this oil. 1.Cleanse the skin before waxing using a pre-waxing lotion such as Aloe Vera, Dr Bump Pepermint or Citrus Pre-Wax Foaming Lotion. Apply the lotion on the skin and evenly distribute on the treated area. Remove the remaining lotion with a cosmetic pad or tissue. This will remove the impurities and will sanitize the skin. 2.To prepare the skin for waxing use the Pre-Post Natural Waxing Oil (Not Scented) or Pre-Post Natural Waxing Tattoo Oil (Scented). Apply a small amount on the skin, distribute oil with light massage movements, remove excess oil with a tissue. After applying the oil the wax will not adhere to the skin so the sensitive skin will be fully protected but because of its special formula, will still grip on the hair. 3.Proceed with the normal waxing procedure. 4.After waxing, apply a small amount of oil on the skin, massage with light movements then removes the excess oil with a tissue. The oil will remove the wax residues and will replenish and moist the skin after waxing. 

Ingredients: Triolein, Glyceryl Dioleate, Parfum (Fragrance), Limonene, Linalool, Eugenol, Benzyl Salicylate.

SKU015403

Data sheet

Country
Italy
Color
Black
Gold
Application area
Body
Skin type
Sensitive Skin
Free of
Rosin
This wax is sparkly gold and extraordinary :)
rating 10
I bought this kit for my daughter but I end up using the wax myself. Compared with what I was using so far this one is much better

You might also like

Add Related products to weekly line up

in the same category

16 other products in the same category: